PYLE Audio PLDVD168 Owner's Manual download pdf (Page 13)

FLASHING LED

If the front panel is not on the main unit, LED (16) will be flashing.

RESET BUTTON FUNCTION

RESET button (17) is placed on the housing and must be activated with

either a ballpoint pen or thin metal object. The RESET button (17) is to be

activated for the following reasons:

-Initial installation of the unit when all wiring is completed.

-All the function buttons do not operate.

-Error symbol on the display.

Note: If press RESET button (17), the unit can’t work yet, please use a

cotton swab soaked in isopropyl alcohol to clean the socket on the back of

the front panel.

RADIO OPERATION

BAND

Press BND button (8) to change bands as below:

For 3 Bands (Europe) For 2 Bands (Europe) For 2 Bands (USA)

SELECT STATION

Rotate TUNING knob (3) clockwise or anticlockwise to adjust the frequency

upward or downward.

LOCAL/DISTANT

Press the LOC button (1) to select between local setting for reception of

strong station and distant setting for reception of weak stations when

tuning.

MONO/STEREO

In FM band, press MON button (7) to select mono or stereo reception for

radio stations. You can sometimes improve reception of distant stations by

selecting mono operation.

DISC OPERATION

Most of the disc operations are controlled by the remote controller.

Ejecting a Disc

Press (EJECT) button (15) on the front panel or button on the remote

control to eject the disc.

BASIC OPERATION

FM MW FM AM

FM MW LW

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

No comments

PYLE Audio PLDVD168 Owner's Manual Page 13