PYLE Audio DVDR5520H User Manual download pdf (Page 25)

English

25

Step 2: Optional Connections (continued)

Connecting to a camcorder

You can use the front sockets to copy

camcorder recordings. These sockets are

located behind the  ap on the right hand

side which provides convenient

connections.

Option 1: Using the DV IN socket

Use this connection if you have a Digital

Video or Digital 8 camcorder. The DV

socket conforms to the i.LINK standard.

It provides the best picture quality.

A Connect an i.LINK 4-pin cable (not

supplied) from the DV IN socket on the

recorder to the appropriate DV OUT

socket on the camcorder.

B Press CAM on the remote control to

select ‘CAM2’.

Helpful Hint:

– It is not possible to record from this

recorder to your camcorder via the DV IN

socket on your recorder.

Option 2: Using the S-VIDEO In or

VIDEO In socket

Use the S-VIDEO connection if you have

a Hi8 or S-VHS(C) camcorder. It

provides very good picture quality.

Alternatively, you can use VIDEO

connection if your camcorder has only a

single video output (Composite Video,

CVBS). It provides good picture quality.

A

Connect the S-VIDEO or VIDEO

socket at the front panel of the recorder

to the corresponding S-VHS or Video

output socket on the camcorder.

B Connect the audio cable (red/white - not

supplied) from the AUDIO L/R sockets

at the front panel of the recorder to the

audio output socket on the camcorder.

C Press CAM on the remote control

followed by P +/- repeatedly to select

‘CAM1’.

Helpful Hint:

– If you connect your camcorder to the scart

socket at the rear of this recorder, select

{ EXT1 } or { EXT2 } as the input source.

Option 1

Option 2

or

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 111 112

Comments to this Manuals

No comments