PYLE Audio PLDN70U Manual download pdf (Page 6)

BEFORE YOU BEGIN INTALLATION:

Before Drilling please check that no cable or wiring is on other side of

wall. Please clamp all wires securely to reduce the possibility of them

being damaged while vehicle is in use. Keep all cables away from hot or

moving parts and electrical noisy components.

We recommend doing a Benchmark test before installations to insure

that all components are working properly.

Step 1

Step 2

Tep 3

Step 4

Step 5

Choose the monitor and camera locations.

Install all cables in vehicle, when necessary a ¾”

(19mm) hole should be drilled for passing camera

cable through vehicles walls. Install split grommets

where applicable.

Once all cable/ and wiring have been properly placed

and routed, perform a system function test by

temporarily connecting the system. If the system

seems to not be operating properly see

troubleshooting.

Backup camera used for monitoring while backing up

must be connected to port # labeled “Backup” and blue

trigger wire must be connected to reverse gear fuse

circuit.

To automatically turn camera ON while shifting

reverse, connect blue wire to reverse gear light/fuse

and plug camera into port # labeled “Backup”.

1 2 3 4 5 6 7 8 9 10 11 ... 20 21

No comments

PYLE Audio PLDN70U Manual Page 6